www.mywifiext.net ex3700
mywifiext.net ex3700 | Netgear Ex3700 Setup
www.mywifiext.net ex3700 users will get WiFi connectivity anywhere in the house. Netgear Ex3700 Range Extender includes Dual Band Technology that establishes one high-speed internet connection to all the wireless devices, thus, your house won’t have any dead zones as well as you will stay connected to all devices.
mywifiext.net ex3700 increases the WiFi range as well as extends the internet speed up to 750 Mbps that is great for console gaming and video streaming. With its Ethernet Port, the users can connect their wired devices like a game console, Smart TV, or streaming player. Netgear Ex3700 WiFi Range Extender consists of two antennas that give more speed and better coverage to the connected devices.
How to Enable FastLane Technology of the www.mywifiext.net ex3700
FastLane technology gives the maximum WiFi performance to its users. It offers high-speed of the internet with a dedicated band that connects your WiFi-enabled device and Netgear Ex3700 Range Extender, and a second band connects your WiFi router and your www.mywifiext.net Ex3700 Extender. Follow the steps given below to enable the FastLane Technology on Netgear Ex3700 Extender Setup.
Load up an internet browser on a laptop or PC Windows.
Enter www.mywifiext.net in the address bar field of the browser.
It will redirect you to the Netgear Login Page. Here, enter the username and password. But, if you have not personalized the login credentials yet, then make use of the default ones.
After successful login, click on the “FastLane Technology” radio button.
After that, it will show two options on the screen: Extender to Router in 2.4GHz and Device to Extender in 5GHz. The users have to select any one of them.
Next, click on the “Apply” tab to save the settings.
How to Setup www.mywifiext.net ex3700 WiFi Extender
The Browser Setup Method is quite a common setup process of configuring the Netgear Ex3700 Range Extender. The Ethernet spot on the range extender can be used to connect wired devices, be it a wired printer, a wired computer, and so on. On the other hand, the WPS technology supports WEP security which gives better performance. Thus, the www.mywifiext.net ex3700 setup is done via a web browser and this method gives a secure connection along with the credential setup. Using a browser www.mywifiext.net ex3700
To start with, connect the Netgear Ex3700 Setup to the switchboard and wait till the Power LED light converts into the green.
Now, connect a WiFi device like a wireless computer, Smartphone, or any other wireless device to the default network of Netgear (NETGEAR_EXT). This network is wireless and an SSID (Service Set Identifier).
When the connection between the wireless device and www.mywifiext.net Ex3700 Extender is successfully established, then the Device Link LED turns into the green on the extender.
Launch the web browser on your connected device and enter the web address http://www.mywifiext.net into the URL bar field of the browser.
Then, this web address will redirect you to the new extender setup page and click on the “NEW EXTENDER SETUP” tab.
Next, fill all the essential details on the setup window and go to click on the “Next”.
After that, hit on the “WIFI RANGE EXTENDER” option on the screen.
Now, go for the WiFi network which you want to extend.
Then, type the Username (Network Name) you like and set the security settings.
Now, it is time to connect the wireless device and the extender. Click on the “Continue” tab.
After that, complete the registration process and click on the “Finish” button.
Finally, disconnect your extender and place it to your desired location. You can connect your devices and enjoy seamless internet speed.
How to Use www.mywifiext.net ex3700 in the Access Point Mode
The users can use the www.mywifiext.net ex3700 WiFi Extender as a WiFi access point that creates a new WiFi hotspot via a wired Ethernet connection. Follow the steps that are discussed below:
Plug your www.mywifiext.net Ex3700 Range Extender into a wall outlet
Wait a few seconds for the Power LED light turns into amber and then turns into green. But in case, the Power LED does not light up, then press the Power ON/OFF button that is placed on the side panel of the extender.
Use an Ethernet Cable to connect the extender’s Ethernet Port to a router’s remote Ethernet LAN jack or Ethernet LAN Port with LAN access.
The range extender joins the LAN and then creates a WiFi hotspot.
After that, use a WiFi network manager on a WiFi device or computer system to search and connect to the default SSID WiFi network that is NETGEAR_EXT.
When the users join the network, the Device Link LED light on the extender confirms that you are connected.
Open the web browser and type its default IP address 192.168.1.250 or mywifiext.net in the address bar field. This link displays the “New Extender Setup” page.
Next, hit the “NEW EXTENDER SETUP” option. But if the users first time log in to the extender, then it shows the “Create Account” screen.
Complete all the fields on the “Create Account” screen and then click on the “Next” button.
Now, hit on the “Access Point” button and the extender starts to check for an Internet Connection.
After that, click the “PUBLIC NETWORK” or the “HOME NETWORK”.
Set the SSID (network name), password (network key), and security option. Click on “Next”.
Your settings are applied and the www.mywifiext.net Ex3700 Range Extender is ready to be used as an access point.
Use a WiFi network manager on your WiFi device or PC to connect to the new access point network.
After some time, a message displays on the screen “you successfully created an access point”.
Complete the registration process and click on the “Finish” button to complete the setup process.